Firstly, It’s crucial to determine whether the Remote is the problem or the volume buttons. You should first re-program your Shaw Remote to make sure that it is correctly linked before attempting to fix the volume issues. After that, you can change the batteries, and remove all interference and dust from the Remote. If the issue continues, you can reset the TV’s audio settings.

Before giving out the possible solutions to the problem, let’s discuss some of the possible reasons why your Shaw volume Remotes stop walking.

Possible Reasons Why Shaw Remote Volume May Stop Functioning:

Damage or worn-out battery 

The Volume button and other buttons may stop walking because of the damage or worn-out battery. If the batteries are running low, some buttons may stop functioning.

Dust

If you’ve owned the Remote for a while, the volume buttons may be dusty. Make sure your Shaw Remote’s volume and other buttons are free of any dirt or filth that could prevent them from functioning. 

4. Disruption

The commands won’t function if there is another TV in the same space or any other devices that could “catch” or interfere with the signal from the Remote to the TV

A disconnected Remote

Your Shaw Remote might not be well-programmed or set to your TV. This will affect all the buttons.

Broken/Damaged Remote

A damaged or broken Remote won’t function properly. This may affect the volume button and other buttons on your Remote.

How You Can Fix Shaw Remote Volume Not Working:

Reprogram Remote 

Ensure that the entire remote is correctly paired to your TV and rule out the chance of an imperfect pairing by re-programming the entire device.

Follow this step to reprogram your Shaw Remote:

Point the Remote at the television. Hold down/long-press the SETUP button until the Remote’s LED turns completely green. Press “SHAW button” on the Remote control, The remote control should begin blinking after pressing the SHAW button. Press the same SHAW button once moreThen enter the code on your TV screen using the number pad on the Remote control. Now, on your Remote, press the power button to turn on the TV. So, test the volume button if it’s now working 

Remove all disruption/Interface

 Like we said earlier, The commands from the Remote won’t function if there is another TV in the same space or any other object that could “catch” or interfere with the signal from the Remote to the TV. Remove TVs, radios, or other gadgets from the area of your TV and Remote. Ensure that nothing is blocking the remote from the TV.

Power Cycle Remote

Power cycling a Remote is to remove power from the Remove by draining residual power from the Remote. This action resets the Remote and it could help solve the problem. To do this, remove batteries from your remote and press every button on your remote including the volume and power buttons. Ensure that all buttons on the remote are pressed. Then insert the battery into the remote again. This process should solve the problem 

Reset TV

The next step to take is to hard reset your TV device if your Volume Remote is still not working. This is another to way resolve the issue. 

Off Your Television Unplug the TV Locate the TV power button and long the power button for 15 seconds, this will drain the remaining power from your TVWait a few seconds and plug your back into the power outletThen on your TV. It has been resetTest if the volume remote is not working 

What Can I Do If None Of The Above Solutions Work?

There are few steps you can still take if the above solutions/recommendations do not fix the problem 

Reset your Television Audio settings

Your TV might be the culprit. You can Reset the TV audio setting to resolve the problem. 

Open TV menuGo to General Settings and select audio settingThen locate “default setting” and select it. This should completely restore your audio settings to default. There is no specific method to restore the audio setting to default, you can check your TV users guide/manual.

Get a new Remote

A damaged or broken Remote won’t function properly. If all the solutions fail, then you might have to buy a new Remote from stores.

Conclusion.

If you are still experiencing this problem with the remote, replacing it would be the best action, but attempting other approaches won’t hurt. We hope the solutions given above will work and your Remote will come back working.

Why is my Shaw Volume Remote not working? 

There are diverse reasons why Your Volume Remote my stop working. The Volume button and other buttons may stop walking because of the worn-out battery, dust around the volume button, or damaged/broken Remote. These are some of the reasons why Shaw’s volume button may stop working.

How can I fix Shaw Volume Remote not working?

You can re-program your Shaw Remote to make sure that it is correctly linked before attempting to fix the volume issues. After that, you can change the batteries, and remove all interference and dust from the Remote. If the problem continues, then reset the TV’s audio settings.